RX4 Waterproof BL Sensored/Sensorless D2 BL ESC
Description
This is the Tekin RX4 Hard Box *Waterproof Electronic Speed Control.
Compatible with sensored/sensorless brushless and brushed motors
Recommended for 1.9 and 2.2 trail adventure and rock race vehicles
Thick-walled, reinforced Hardbox design that withstands the elements
and rough environments
High voltage, 6.0/7.4V @ 8A programmable BEC
HotWire PC Interface for advanced programming and updating with
EZ Access HotWire programming port (interface not included,
requires the TT1451 Tekin Hotwire 2.0, TEKM1451)
On-board temperature indicator
D2: Dual Drive Mode technology
Datalogging capability
Pit Tune Mode
DGF2: Digital Glitch Filtering V2
One-Touch Radio Calibration
180 day limited warranty through Tekin beginning at date of purchase
Tube of Dielectric Grease
Three 12AWG Motor and Battery Wires
Hotwire Connector (Hotwire interface not included)
Instruction Sheet
Motor and Battery Connectors of modeler's choice
Controls: Forward/Brake/Reverse
Input Voltage: 2S-6S LiPo
Motor Limit Brushed Mode: No Limit
Motor Limit brushless Mode: 2S - 5700kV 4-pole
3S - 3100Kv 4-pole
4S - 2300Kv 4-pole
5S - 1800Kv 4-pole
6S - 1200Kv 4-pole
Max Current: 240amps per phase
Timing Profiles: 7 choices (on board)
Brushed and brushless Modes: FWD Only / FWD-REV / FWD-REV Delay
*Waterproof in sensorless operation only. Dielectric Tek Grease
provided for waterproofing sensor ports.
Not intended for use when submerged in liquid.
jxs 04/05/17
ir/jxs
FEATURES:
Recommended for 1.9 and 2.2 trail adventure and rock race vehicles
Thick-walled, reinforced Hardbox design that withstands the elements
and rough environments
High voltage, 6.0/7.4V @ 8A programmable BEC
HotWire PC Interface for advanced programming and updating with
EZ Access HotWire programming port (interface not included,
requires the TT1451 Tekin Hotwire 2.0, TEKM1451)
On-board temperature indicator
D2: Dual Drive Mode technology
Datalogging capability
Pit Tune Mode
DGF2: Digital Glitch Filtering V2
One-Touch Radio Calibration
180 day limited warranty through Tekin beginning at date of purchase
YOU WILL RECEIVE:
RX4 ESC with Cooling Fan, Receiver Connector and On/Off Switch Tube of Dielectric Grease
Three 12AWG Motor and Battery Wires
Hotwire Connector (Hotwire interface not included)
Instruction Sheet
REQUIREMENTS:
SPECIFICATIONS:
Input Voltage: 2S-6S LiPo
Motor Limit Brushed Mode: No Limit
Motor Limit brushless Mode: 2S - 5700kV 4-pole
3S - 3100Kv 4-pole
4S - 2300Kv 4-pole
5S - 1800Kv 4-pole
6S - 1200Kv 4-pole
Max Current: 240amps per phase
Timing Profiles: 7 choices (on board)
Brushed and brushless Modes: FWD Only / FWD-REV / FWD-REV Delay
DIMENSIONS:
1.6 x 2.0 x 1.4" (40.6 x 50.8 x 35.5mm) COMMENTS:
provided for waterproofing sensor ports.
Not intended for use when submerged in liquid.
jxs 04/05/17
ir/jxs
Manufacturer information
Compatible vehicles
1:10 Baja Rey 4WD Desert Truck
Ascender 1:10 Chevrolet K5 Blazer
SMT10 Grave Digger Monster Jam Truck
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
TEKM2000
0706893020001
706893020001
Additional details
Shipping weight
6.08 ounces
172.38 grams
0.38 pounds
Package dimensions
5.88 x 4.50 x 1.50
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️