Hollis, New Hampshire USA
open since 1987 online since 1996
last human update to site: Friday October 19 at 10:52 PM my account login | view shopping cart
search Shop by: cars & trucks just added hot deals vehicle brand category Information: dealers shipping policy questions contact
photo_id:
made by part number real-time inventory status price
Bob Smith Industries BSI210  0 in Hollis warehouse
$23.99
Finish-Cure 20 Min. Epoxy 13oz.
FINISH-CURE 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CURE should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CURE. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light weight finish. If room temperature is below 70 degrees F use a heat gun on the surface several times for the next 2 hours. When dry, lightly sand, then fill surface with a low weight spakeling compound, scrapping off excess with a playing card. Sand to a smooth finish ready for primer. For heavy weight fiberglass, apply the epoxy before and after laying down the cloth. FINISH-CURE is best mixed in a disposable cup.


When calling or writing, ask for BSI210  0 in Hollis warehouse
manufacturer Bob Smith Industries
category Epoxy
Cleaners Adhesives and Lubricants, Epoxy
part number BSI210
retail price $29.99
sale price $23.99
in stock?  0 in Hollis warehouse
shipping weight 18.5000 ounces
(523.6 grams)
(1.156 pounds)
Shipping (you will pay for only the heaviest or largest item in your order) For example: If you order a monster truck and a package of screws, you will pay for the shipping on the monster truck only.
in store only In store pick up Hollis New Hampshire USA $0.00
UPS Ground - tracking number - insured $13.88
UPS Air 3 business day - tracking number - insured $28.88
US Post Office Overseas Military APO or FPO - no tracking - no insurance $9.88
US Post Office Priority Mail - no tracking - no insurance $9.88
works with this item is known to work well, or was designed to fit these cars.
» ~ general hobby plastic models
» ~ general hobby RC airplane - brushless
» ~ general hobby RC Aircraft parts
» ~ general hobby HO Scale Train
» ~ general hobby RC Boats
» ~ general hobby Pinewood Derby
» ~ general hobby Project Kits
» ~ general hobby Airsoft
» ~ general hobby Model Rockets
Calling? Save time and ask for part number: BSI210
Calling? write down this number
ask for
BSI210
  • online stock status is updated every few seconds, and is the exact same data our phone staff sees (currently  0 in Hollis warehouse
    )
  • pricing is the same online as on the phone
  • our severs and site use 128 bit ecryption for maximum saftey of your information
This part is not available.
If you would like to be notified if this part becomes available, enter your e-mail address here:
photosphoto_id: 139714
Bob Smith Industries BSI210 Finish-Cure 20 Min. Epoxy 13oz.
this product is made by: Bob Smith Industries
logo for Bob Smith Industries
Bob Smith Industries
8060 Morro Road

Atascadero, CA 93422
http://www.bsiadhesives.com/

 

 

Privacy All content © 2018  Hobby Etc. Inc.,   26 Clinton Dr,  Hollis,  New Hampshire 03049,  USA
phone: 603-883-4919 HAVE PART NUMBERS READY! fax: 603-595-1498
Retail Store Hours: Monday through Saturday 8 AM to 5 PM (Eastern time zone)