Manchester, New Hampshire, USA

Open since 1987 | Online since 1996

Finish-Cure 20 Min. Epoxy 13oz.

Manufacturer

Bob Smith Industries logo

Part number

BSI210

Real-time inventory

Out of stockClick to refresh

Price

$38.99
Sale -$15.00
$23.99

This part is not currently in stock.

Description

FINISH-CURE 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CURE should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CURE. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light weight finish. If room temperature is below 70 degrees F use a heat gun on the surface several times for the next 2 hours. When dry, lightly sand, then fill surface with a low weight spakeling compound, scrapping off excess with a playing card. Sand to a smooth finish ready for primer. For heavy weight fiberglass, apply the epoxy before and after laying down the cloth. FINISH-CURE is best mixed in a disposable cup.

Manufacturer information

Bob Smith Industries logo

Bob Smith Industries

155 Cow Meadow Place

Paso Robles, CA 93446

https://www.bsiadhesives.com/

Alternate part numbers

Here are some alternate part numbers and product codes that you may find this part listed under on other sites:

707336210003

Additional details

Shipping weight

18.50 ounces

524.47 grams

1.16 pounds

Package dimensions

9.00 x 6.00 x 2.00

⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️