Manchester, New Hampshire, USA

Open since 1987 | Online since 1996

BLX185 6S Brushless Electronic Speed Control ESC

Manufacturer

Arrma logo

Part number

ARAM2000

Real-time inventory

Out of stockClick to refresh

Price

$165.98
Sale -$27.99
$137.99

This part is not currently in stock.

Description

This is the Arrma BLX185 6S 150A Electronic Speed Control.
FEATURES:
Can be powered by 3S, 4S, OR 6S (11.1V, 14.8V, OR 22.2V) LiPo with loop connector 35C 5000mAh minimum requirement 6.0V/3A continuous output, 12A max Bridge connector for using single 4S OR 6S battery (5S is not compatible) Over voltage and overheat protection Two stage LiPo cutoff, single stage NiMH cutoff Temperature protection mode if ESC temperature exceeds 221°F (105°C) Integrated cooling fan to reduce heat during extreme running Waterproof under normal usage Integrated hold down tabs easily secure inside vehicle chassis Set up from factory to default to a LiPo battery mode, settings can changed, see COMMENTS below;
YOU WILL RECEIVE:
BLX185 6S ESC with Cooling Fan, two Amass XT90 Battery Connectors with 10AWG Wires, Receiver Plug, Power Switch and Set Button 10AWG Motor Wires with 4mm Diameter Gold Plated Female Connectors, Instructions and Bridge Connector
REQUIREMENTS:
Motor such as the Arrma BLX 2050Kv 6S Brushless Motor, ARAG2000
SPECIFICATIONS:
Length: 2.26" (57.5mm) Width: 2.34" (59.5mm) including hold down tabs Height: 1.53" (38.9mm) Weight: 6.9oz (196g) Switch Length: 1.15" (29.3mm) Switch Width: 0.5" (12.8mm) Switch Height: 0.71" (18mm) Receiver Wire Length: 7.87" (200mm) Battery Wire Length: 6.5" (165mm) Motor Wire Length: 5.12" (130mm) including connector Motor Limit: 3000kV Wire Size: 10AWG Motor Connectors: Gold bullet Battery Connectors: Two Amass XT90 BEC Voltage: 6.0V BEC Current Minimum Continuous: 3A BEC Current Max Burst: 12A Low Voltage Cutoff: 3.2V Over Voltage Protection: Over 6S LiPo (22.2V) Continouous Amp Rating: 150A Throttle Mode: FWD/BRAKE/REV Throttle Setup: Manual via pushbutton User Programmable: Yes, via button only Battery Mode: LiPo/NiMH, default LiPo mode
COMMENTS:
The BLX185 was set from factory to default to a LiPo battery mode. If any adjustments such as recalibration were made, check to see that the battery mode has not been inadvertently set to NiMH mode. Follow these steps to verify battery mode; 1. Raise the vehicle chassis so that the wheels are not touching anything. 2. With the battery or batteries charged and connected to the vehicle's ESC leads, switch on the transmitter and then switch on the vehicle. If a green LED flashes once the ESC is in LiPo mode. If there is no LED flash on the ESC, and a pulsing noise is made by the motor, the ESC is in NiMH mode. If you intend to use LiPo batteries DO NOT operate ESC in NiMH mode, the batteries may be damaged. To switch ESC from NiMH mode to LiPo mode perform the following steps; 1. Connect battery, switch on transmitter, press and hold set button and turn on ESC. The red LED will flash. 2. Keep holding set button until green LED flashes. The number of flashes represents the variable number of attributes being programmed. 3. To enter the battery mode programming function, release the set button when one green LED flashes. 4. Press the set button to change battery mode between LiPo and NiMH. One RED LED flash indicates ESC is set to LiPo mode. 5. To save setting, switch ESC off. CRC 07/02/16 jxs 03/24/16 ir/jxs updt jxs 04/03/17 &

Manufacturer information

Arrma logo

Arrma

3002 N. APOLLO DRIVE, SUITE #1

CHAMPAIGN, IL

https://www.arrma-rc.com/

All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.

Alternate part numbers

Here are some alternate part numbers and product codes that you may find this part listed under on other sites:

ARAAR390211
AR390211
052127022415
5052127022415

Additional details

Shipping weight

10.56 ounces

299.39 grams

0.66 pounds

Package dimensions

5.50 x 3.38 x 2.13

⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️