Manchester, New Hampshire, USA

Open since 1987 | Online since 1996

1/18 Rally Car RTR FPV w/Camera/Goggles/Monitor

This part is discontinued and we no longer carry it.

Manufacturer

Dromida logo

Part number

DIDC0081

Real-time inventory

Out of stockClick to refresh

Price

$309.98
Sale -$79.99
$229.99

This part is discontinued and we no longer carry it.

Description


**Additional Technical Info Will Be Added When It Becomes Available. **
Dromida brand Electric Powered, Radio Controlled, 1/18 Scale
Ready to Run FPV Rally Car with Camera from Dromida.
*600TVL FPV Video Camera*
**25mW 40-Channel 5 Band 5.8GHz Video Transmitter**
**Tactic FPV-RM2 40-channel, 5.8GHz FPV**
monitor with 4.3 LCD and Micro Memory Card Port
**Tactic FPV-G1 Goggles**
FEATURES:

Video Monitor: Tactic FPV-RM2 40-channel, 5.8GHz FPV monitor
(TACZ5152) with 4.3 (109mm) LCD and micro memory card port* and
sun shield, powered by 1S 3.7V 1400mAh LiPo battery (included)
*memory card port accepts up to 32GB memory card, not included
Video Transmitter: 25mW 40-channel, 5-band 5.8GHz
Camera: Factory Installed 600TVL FPV
Goggles: Tactic FPV-G1 Goggles (TACZ5200)
Chassis: Plastic construction with countersunk screw holes
Drive: Four wheel shaft
Differentials: Bevel gear type
Motor: Factory-installed Torque 370 motor with aluminum mount
Radio: Tactic D100 2-channel with RE-18 waterproof receiver and
speed control, and DS100 waterproof steering servo with servo saver
for precise steering control, steering and throttle trims and dual
rates, servo reversing LEDs for monitoring power levels
Rally Car Battery: 6-cell, 1300mAh NiMh
Battery Charger: USB for NiMh battery
Body: Printed and decaled molded polycarbonate
Shocks: New shorter design for better control
Shock Towers: Composite plastic
Tires: High-grip rubber
Front Bumper: Foam
Ball Bearings: Full set included
YOU WILL RECEIVE:

RTR FPV Rally Car with Camera, Transmitter, Monitor, Goggles, LiPo
Battery for Monitor, NiMh Battery for Car, Motor, Radio System,
USB NiMh Charger, Sun Shield, Trimmed Body, Micro USB Charge Lead,
4 AA Batteries for Transmitter, Instruction Manual
REQUIREMENTS:

Track and Maintenance Equipment
SPECIFICATIONS:

length: 10.9 (277mm)
width: 5.1 (130mm)
height: 4.25 (108mm)
Weight w/Battery: 1.3lb (590g)
Wheelbase: 6.7 (170mm)
COMMENTS
For increased speed Dromida offers a brushless Conversion Kit
(DIDC1152) that includes a 5300Kv brushless Motor, 25A ESC, and
other upgraded components. The Dromida 2S 7.4V 1600mAh battery
(DIDC1134) is recommended for best results and highest speed with
this conversion kit.
**Do not use a LiPo battery with the stock ESC. The stock ESC does
not have Low Voltage Cutoff, and will damage the LiPo battery.
COMMENTS
For replacement or to upgrade to ball bearings use:
Qty. Size Location Qty. Bearing Set
4 8x12mm Fr Uprights 2 DIDC1071
4 8x12mm Rear Uprights 2 DIDC1071
2 8x12mm Fr Diff 1 DIDC1071
2 8x12mm Rear Diff 1 DIDC1071
1 8x12mm Spur Gear 1 DIDC1071
1 6x10mm Spur Gear 1 DIDC1070
1 6x10mm Driveshaft 1 DIDC1070
jxs 07/14/17

Manufacturer information

Dromida logo

Dromida

3002 N. Apollo Drive, Suite #1

Champaign, IL 61822

https://www.dromida.com/

Alternate part numbers

Here are some alternate part numbers and product codes that you may find this part listed under on other sites:

707768200818
0707768200818

Additional details

Shipping weight

93.18 ounces

2641.72 grams

5.82 pounds

Package dimensions

16.34 x 12.99 x 7.48

⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️