Rc4wd 1/10 High Performance Smd Led Light Bar (75mm/3)
Description
Cast Molded Housing
Reversible "L" brackets to fit many applications
Adjustable "L" brackets for rotating light
16 Individual LED bulbs
Super Bright Lighting
Vented on side to dissipate heat
Works with up to 11.1v lipo with use of a BEC to regulate voltage below 7.4 volts
Standard Receiver Plug
Connects to extra channel on receiver
2mm Mounting Holes
Rated Output 32 Lumens
Overall length: 3.7in / 95mm
Light Bar width: 3.1in / 7.88mm
Overall height: 0.81in / 20.8mm
Light Bar height: 0.63in / 16.2mm
Weight: 1.09oz / 31g
Use medium grade threadlock on "L"bracket nut to prevent loss and to keep the light in position.
Mounting hardware can be found here. M2 SHCS / M2 BHSC
While the lightbar comes with a standard receiver plug, this is only for ease of use. The receiver will not allow enough power for the lightbar and it will be dim. If you want the light to be bright, you will need to power it directly from your battery, or use a BEC to get more power to your receiver.
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Compatible vehicles
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
1.47 ounces
41.73 grams
0.09 pounds
Package dimensions
3.00 x 5.75 x 1.50
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️