TRF103 Chassis Kit On-Road 2WD
Description
The TRF103 is a high-spec formula one chassis that takes the genre to a new level. This hi-spec 2WD formula chassis is built around carbon fiber lower and upper decks, with front lower and upper arms also crafted from carbon fiber plate. Front camber and caster angles can be altered via the upper arm attachment components. At the rear of the car, there is a choice of 2 suspension types: a link setup for high-grip surfaces; and a T-bar setup for lower grip conditions. Chassis roll is regulated by individual left and right friction dampers, while changing the carbon fiber rear shaft position allows 2 different wheelbases.
- The kit comes with a choice of rear suspension setups: a link setup suited to high-grip circuits, and a T-bar setup for use on more slippery tracks
- Features carbon fiber front upper and lower arms. Alteration of caster (9 or 12 degrees) and camber (1, 1.5 or 2 degrees) angles
- Dual rear friction dampers are employed (one on the left, one on the right) to govern chassis roll
- Rear axle position can be altered, with a corresponding change in wheelbase - standard and short settings are available
- Compatible with F104 bodies
- 2.5mm thick Carbon Fiber Lower Deck
- 2.5mm thick Carbon Fiber Front Lower Arms
- 2.5mm thick Carbon Fiber Middle Brace
- 2.5mm thick Carbon Fiber Lower Brace
- 2.0mm thick Carbon Fiber Rear Bulkhead Plate
- Carbon Fiber Rear Shaft & Integrated Diff Housing
- TRF Damper (HL Cylinder & Titanium Coated Shaft)
- 2.0mm thick Carbon Fiber Upper Deck
- 2.5mm thick Carbon Fiber Front Upper Arms
- 2.5mm thick Carbon Fiber Upper Arm Mount
- 2.5mm thick Carbon Fiber Upper Brace
- FRP T-Bar
- Left & Right Roll Dampers
- Aluminum Servo Mounts
- Aluminum Clamp Type Wheel Hubs
- Aluminum Motor Mount
- Aluminum Diff Housing
- Aluminum Motor Spacer
- Aluminum Turnbuckle Shafts
- Hi-Torque Servo Saver
- 04 Module Spur Gear (96T)
- 04 Module Pinion Gear (24T)
- Radio system (transmitter and receiver)
- Steering servo
- 7.2-7.4 volt battery pack & compatible charger
- Electronic Speed Control (ESC)
- 540-type motor
- F1 tires and wheels
- F1 body set
- Tamiya PS paint
- Bearings: Includes full ball bearings
- Body Material: Not Included
- Chassis Material: Carbon Fiber
- Chassis Type: TRF103
- Construction Type: Assembly Kit
- Differential Type: Ball Pressure Plate
- Drive Type: 2WD
- Scale: 1/10
- Shock Damper: Aluminum oil filled
- Suspension: Coil Spring Front/Mono Shock Rear
- Terrain Use: On-Road
description revised by: SN September 30, 2019
Manufacturer information
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
34.60 ounces
980.89 grams
2.16 pounds
Package dimensions
18.00 x 8.50 x 5.00
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️