S3004 Servo Standard Ball Bearing
Description
This basic servo is used in cars, boats, or where standard servos are used.
This is a replacement for the following servos. (S15)
This servo can produce high-current draw from your batteries.
If using NiMh or LiPo batteries, make sure they are capable
of delivering sufficient amps.
Precise tight fit throughout the geaRTRain
Being standard size and light weight, it fits many applications.
Three pole motor
Nylon gears
One year warranty
Four brass eyelets
Four Black one-piece rectangular rubber grommets (FUTM2348)
Four servo mounting screws
Three servo horns (1 lg. round, 1 lg. "X" and 1 sm. "x")
0.19 sec/60 @ 6.0V
Torque: 44 oz-in (3.2 kg-cm) at 4.8V
57 oz-in (4.1 kg-cm) at 6.0V
(40 x 20 x 36mm)
Weight: 1.3 ounce (1-5/16oz) (37 grams)
Connector: "J" type with approx. 5" wire
1.42 (36) bottom to top of case (not output shaft)
.60 (15) flange to top of shaft
1.0 (25) flange to bottom of servo
1.59 (40.4) case length {holes on-center 1.93 (49)}
.78 (19.8) case width {holes on-center .39 (10)}
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
1.28 ounces
36.29 grams
0.08 pounds
Package dimensions
2.00 x 3.00 x 4.50
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️