Black Death Comm Drops
Description
Start with a drop or two of oil on each bushing or bearing and a drop or two of comm drops on each brush. About half way through the break in add another drop or two of comm drops.
For a sealed can motor like a Tamiya Mabuchi Motor, run it for at least 1 hour.
For a rebuildable brushed motor with stock or upgraded brushes, run the motor for about 30 minutes
If you have a motor mount to hold the motor, add a small fan to the motor shaft to blow air through the motor in order to keep it cool.
When finished clean the motor with electric motor spray, and re-oil the bearings or bushings
Adding one drop of comm drops before a run will add a little performance, but brushes will wear quicker.
Great to use when breaking in your new brushes.
Lubes commutator and keeps brushes from burning.
Comes in a 1/2oz (15ml) Needle Tip Bottle
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
0.80 ounces
22.68 grams
0.05 pounds
Package dimensions
3.99 x 3.99 x 0.25
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️