Hs-7954sh High Voltage Ultra Torque Dual Bb
Description
This is the HS-7954SH High-Voltage Ultra Torque Digital Servo from Hitec
- Coreless motor for precise centering and accuracy
- G2 programmable digital circuit, programmable features include;
- Dead Band Width Speed (reduction)
- Fail Safe Position Direction (CW/CCW)
- Fail Safe On/Off End Points
- Overload Protection Resolution High/Low
- Steel gears for much longer life than conventional metal gears
- Nine O-rings for extra resistance to moisture and dust
- Capable of operating on two cell LiPo packs
- Weight: 2.30oz (65.2g)
- Speed: 0.15s at 6.0V, 0.12s at 7.4V
- Torque: 333oz/in at 6.0V, 403oz/in at 7.4V
- Wire Size: 22 gauge twisted wire with gold plated connectors
- Drivetrain Type: Dual ball bearing
- A note on coreless motors - a conventional servo motor has a steel core armature wrapped with wire that spins inside the magnets. In a Coreless design, the armature uses a wire mesh that forms a cup that spins around the outside of the magnet. This arrangement is much lighter resulting in smoother operation and faster response time.
description revised by: SN July 2, 2018
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should t here be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
4.80 ounces
136.09 grams
0.30 pounds
Package dimensions
2.00 x 3.00 x 4.50
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️