TRX Pro .15 engine with pull start Short crank
Part number
Real-time inventory
Price
This part is discontinued and we no longer carry it.
Description
This is a Short Crankshaft Version of the TRA Pro TRX-15 Engine.
It is for modelers who want higher performance than a .12 size engine
in their 1/10 scale kits such as Nitro Stampede, RC-10GT or GTX.
This is a Pull Start Version.
Oversized Machined Aluminum Blue/Silver Anodized Cylinder Head
Channelled Beam Connecting Rod for Improved Oil Flow
Precision Ball Bearings
Large-Bore, High-Flow Carburetor
Double O-Ring Seals on High and Low Needles
Industry-Standard Mounts and Crankshaft Lengths to Fit Most
Applications.
One Air Cleaner (Black rubber with Black foam element)
One Full Instruction Book and Parts Exploded View
One "TRA" Decal Sheet
Installed Glow Plug (standard long
no idle bar)
the TRX-12, which is approximately 9-11% more power than the OS
CZ-Z. These figures are tested on a dyno (loaded) which provides
power curves on a computer. TRA was not able to provide any
numbers on BHP, bore, stroke etc. Keep in mind that these figures
are often useless, as they will vary from engine to engine. And
there are other variables to consider: the kit, terrain, %nitro
in fuel, etc. . . . . .
Overall Length (front end of shaft to back of starter): 92mm (3-5/8")
Height (top of cylinder head to bottom of backplate): 93mm (3-5/8")
Width (cylinder head): 41mm (1-1/2")
Mount holes (center to center): left to right: 31mm (1-1/4")
front to back: 11mm (7/16")
Overall width of mounting ears (where the holes are): 40mm (1-9/16")
***Mount the same as an OS .12 and .15 CV***
For the Pro 15 w/Short Crankshaft, W/O Pull Start, use TRAG4004.
If you have any other kit, I would call that manufacturer
or call TRA directly at 1-888-TRA.
TRA engines run much hotter than "normal" engines (O. S. , ASP,
ThunderTigre, etc. ) . Therefore, TRA recommends their Top Fuel
(TRAP5010) and their glow plug (TRAG3230) to run the engine cooler.
JAL 2/5/99
ir/jl
&
Manufacturer information
All warranty claims should be handled directly through Traxxas and not your hobby dealer. If you suspect you have a warranty claim, contact Traxxas toll free at 888-TRAXXAS (872-9927). Many times Traxxas is able to immediately solve problems over the phone. Traxxas Corporation assumes responsibility for it's products and will repair or replace any defective product at it's sole discretion. The Traxxas toll-free customer service line provides direct access to factory trained representatives. In most cases, warranty items are sent out the same day the request is received. In the event that factory service is required, Traxxas technicians are usually able to make repairs within a 3-5 working day time frame after they receive the product. Traxxas offers a 30-day limited warranty on all it's electronic components and a two-year, manufacturer-defect warranty on Traxxas nitro-powered engines. To take advantage of any of the services Trxxas offers, or if you believe you have a warranty issue to solve, simply send in the item(s) in question to the Dallas address with attention to customer service. Include a copy of your receipt, a note describing the reasons you are sending the item(s) in to our repair lab, a daytime phone number, and a return shipping address.
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
13.92 ounces
394.65 grams
0.87 pounds
Package dimensions
10.00 x 8.75 x 2.75
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️