30t T30 T-Series Pro Hand Wound Brushed Rock Crawler Motor
Description
Tekin's Pro Hand Wound Brushed Crawler Motors are raising the bar with the release of the 30 and 40 turn versions. Perfect for all aspects of rock crawling, these Pro Hand Wound motors give you the punch or the creep when and where you need it. whether crawling the rocks or hopping over them, the lower turns give an increase in wheel speed many are looking for in today's setups. Using the same larger comm, lay-down brushes and precision balanced hand winds as our previous trail-proven pro motors, the Tekin Pro Hand Wound T- Series motors are ready to get the job done. Pair a Pro motor with an FXR or BXR speed control and harness the professional brushed power!
- Crawler, Rock Race and Trail Rig Specific
- Dual Precision Ball Bearings
- alum Endbell Heat Sink Plates
- Gold Plated Copper Solder Tabs and Brush Hoods
- Hand Wound Precision Armature (PRO Models)
- Adjustable Timing
- High Torque Specification
- High Strength Ferrite Magnets
- Completely Rebuild-able
- Competition Legal
- RECON G6 Certified
- Weight: 6.03oz / 171g
- Shaft size: 3.2 (1/8 inch) x 11.3mm
- Motor diameter: 35.85mm / 1.40 inch
- Motor length: 52.5mm / 2.1 inch
- Magnet material: PRO - FB9 Ferrite
- Rebuildable: Yes
description revised by: SN October 2, 2019
Manufacturer information
Compatible vehicles
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
6.88 ounces
195.06 grams
0.43 pounds
Package dimensions
5.75 x 3.88 x 1.50
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️