Manchester, New Hampshire, USA

Open since 1987 | Online since 1996

Aluminum Progressive Damping 90mm Shocks (2)

Manufacturer

Hot Racing logo

Part number

TD90PC06

Real-time inventory

Out of stockClick to refresh

Price

$33.88

This part is not currently in stock.

Description

Hot Racing progressive sprung and dampened 90mm threaded body aluminum shocks with bleeder shock caps for many 1/10th scale off-road vehicles using 90mm shocks. Some applications include, but are not limited to: many 1/10th scale truck and buggy front shocks; the TRA Bandit front, Nitro Rustler/Slash/Sport/Stampede front, Rustler front, Slash 2WD front, Slash 4x4 front, Stampede 2WD front, Stampede 4x4 front; and and other similar vehicles

FEATURES:
- CNC machined 6061-T6 billet aluminum shock bodies, collars, caps, and spring retainers
- Threaded shock bodies
- CNC machined 10mm Delrin pistons
- Progressive springs
- Shock bore sleeve with v-groove cutouts provides progressive damping through shock stroke; soft at initial stroke and firmer as the shock compresses
- 3.5mm stainless steel shock shafts
- Silver and blue anodized aluminum components
- Bleeder shock caps
- Threaded shock collars with o-rings to prevent unwanted movement
- Composite plastic lower shock ends with aluminum balls
- Fully assembled, just add shock oil and bleed
YOU WILL RECEIVE:
- Two (2) assembled shocks
- Two (2) M3x20mm flat head cap screws
- Two (2) M3x18mm button head cap screws
- Two (2) 3mm countersunk washers
- Two (2) 5.9 hollow balls
- Four (4) 1.5mm thick spacers
- Four (4) 3mm thick spacers
REQUIREMENTS:
- Silicone shock oil of modeler's choice and bleeding per the typical bladder shock bleeding procedure
- Best used with Team Associated shock Green Slime grease or shock o-ring grease when rebuilding lower seal
- Snap ring pliers when rebuilding lower seal
SPECIFICATIONS:
- Replaces TRA Big Bore Long Shocks: TRA2660, 3760, 3760A, 4760
- Extended length: 90mm
- Overall length: 100mm
- Spring: 1.54mm wire, 10 turn dual rate
COMMENTS:
- Use spacers as need for installation
- Can be used with optional Hot Racing springs: SLF48FS261 (progressive), SLF48MR268 (linear), SLF48RS286 (progressive)
- See Hot Racing TD90X06 for linear damping 90mm shocks
- Accepts optional Hot Racing silicone shock boot RDP34201
- Replacement parts are Hot Racing: RTD910BN (shock ends), RTD1010X (bladders and lower seals)

description revised by: SN April 23, 2018

Manufacturer information

Hot Racing logo

Hot Racing

140 Hayward St

Manchester, NH 03103

https://www.hot-racing.com/

All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.

Alternate part numbers

Here are some alternate part numbers and product codes that you may find this part listed under on other sites:

083745842937
HRATD90PC06

Additional details

Shipping weight

2.47 ounces

70.02 grams

0.15 pounds

Package dimensions

3.99 x 3.99 x 0.75

⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️