Hex Hub Adapters 12mm to 17mm W/ 10mm Offset
Description
- 12mm hex to 17mm hex conversion
- 10mm offset extension per side
- 17mm wheel nuts
- Adapters are anodized silver in color, wheel nuts are anodized black
- Wheel nuts feature an internal o-ring to maintain the nut position, even under the most severe conditions
- Four (4) wheel nuts
- Four (4) M4 axle hub nuts
- These adapters fix a wide array of vehicles. Make sure the vehicle uses a hex at least 5mm thick, or the adapter may bind against the hub.
- Max axle diameter: 5mm
- Axle thread: M4
- Hex depth: 5mm
- O-rings are 11x1mm
description revised by: SN November 12, 2018
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Compatible vehicles
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
1.86 ounces
52.67 grams
0.12 pounds
Package dimensions
2.50 x 3.25 x 0.75
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️