Servo Driver Pro W/Centering and Cycle Modes
Description
Precise Centering Indicator,
Servo Cycler Feature,
Easy Connection & Operation,
Universal Connectors
MX 8340
Servo Driver Pro
For setting servos, connect servo to servo
connector. Connect receiver battery of the same voltage
you plan to use on the airplane. DO TO EXCEED
6 VOLTS. Turn the dial to change position of
the servo. When servo is pecisely centered the LED
will illuminate. To CYCLE a servo turn on the slide
switch. The dial will now control the speed of the
cycle.
When driving Electronic Speed Controls make
sure Cycle switch is off. No battery is needed if ESC
has Battery Eliminator Circuit.
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
2.06 ounces
58.51 grams
0.13 pounds
Package dimensions
5.50 x 4.50 x 1.50
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️