Systems Guardian 2d/3d Inertial Stabilizer
This part is discontinued and we no longer carry it.
Description
This is the Eagle Tree Guardian 2D/3D Inertial Stabilizer
for Model Airplanes.
FEATURES:
to help recover from lost orientation
Compatible with nearly all fixed wing models including gas, glow and
electric powered models including wings, foamies and sailplanes
2D flight mode helps beginning pilots return model to level flight
when needed, and helps compensate for windy conditions, imbalance,
poor aerodynamics, or high motor torque
3D flight mode makes control snappier for precision manuevers and
has two submodes for 3D flying;
In 3D Heading Lock submode the Guardian locks onto the present
attitude (pitch, roll, and heading) allowing easier stunt
performance
In 3D Gyro submode the Guardian uses its built-in 3 axis gyro to
increase model's stability, reducing effects of gusts,
turbulence, motor torque, and other factors
May be tuned with a small screwdriver or set up on a PC with a USB
cable (not included)
Small size installs in fuselage and connects between receiver and
servos-no additional sensors or hardware to install
YOU WILL RECEIVE:
Guardian 2D/3D Inertial Stabilizer with Instructions and Connectors for your Receiver and Servos
SPECIFICATIONS:
Current Draw: Approximately 31mA
DIMENSIONS:
1.62 x 0.86 x 0.42" (41 x 22 x 11mm) Weight: 0.4oz (11g) including harness
Maximum Servo Current Capability: 5A
jxs 10/25/12
ir/jxs
updt jxs 01/10/13
&
Manufacturer information
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
0182585001457
GUARD-STAB
182585001457
ETR00145
ETRGUARDSTAB
ETRA0001
Additional details
Shipping weight
2.72 ounces
77.12 grams
0.17 pounds
Package dimensions
7.63 x 5.38 x 1.13
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️