This is the Radio Controlled, Electric Powered, 1/8 scale
4WD Yeti XL Rock Racer Kit from Axial.
**Additional Technical Info Will Be Added When It Becomes Available. **
Chassis: Composite plastic with integrated upper and lower aluminum
braces for greater stiffness, multiple upper link positions to
adjust anti-squat
Drive: Four wheel shaft, AR60XL OCP solid rear axle, WB XL CVJ rear
driveshaft with captured cross pin design-no set screws to lose
front CVJ metal universals, adjustable steel turnbuckles
Shocks: Icon Vehicle Dynamics threaded aluminum Big Bore 16, dual
rate springs
Steering: Dual shear rack
Transmission: All metal gears, full ball bearings, single speed with
high gear installed, optional two-speed transmission component sold
separately
Slipper Clutch: Dual slipper design with aluminum pad on each side of
32P spur gear for right amount of slip, and heat resistance
Roll Cage: Y-480 flexible plastic, resembles welded steel tubes
Receiver Box: Waterproof, with three silicone seals (electronics not
included)
Weight Box: Black plastic styled to resemble a scale fuel cell, may
be used as an additional electronics box
Tires: Oficially licensed 3.8" (96mm) Falken WildPeak M/T S30
compound
Wheels: Officially licensed Raceline Monster wheels, 3.8" (96mm)
diameter, 17mm hexes
Front Suspension: Independent, maintains high-speed stability and
travel direction when encountering the roughest of terrain
Rear Suspension: 4-linked Long travel sway bar (medium 3.4mm),
3mm aluminum lower link plates
Body: Clear polycarbonate .040" (1mm) thick, with interior tray,
three driver helmets, decals, spare wheel and tire
4WD Yeti XL Rock Racer Kit with Body, Tires, Wheels, Shocks, Decals
3 Driver Helmets, Interior Tray, Spare Wheel and Tire, and
Instruction Manual
Radio: 2-channel
Steering Servo: Metal gear, high-torque
Power System: 1/8 scale brushless 4-pole
Batteries: Two 2S or 3S LiPo Packs with connector to match ESC, 25C
minimum discharge rating
Battery Charger: To match selected batteries
AA Batteries: Four for transmitter
LiPo charge bag, maintenance and trail equipment
Vehicle;
length: 25.75" (654mm)
width: 16.3" (414mm)
height: 11.10" (282mm)
Wheelbase: 18.5" (470mm)
Ground Clearance: 2.48" (63mm)
Weight: 12.75" (5.78kg) including electronics
Body;
length: 23.5" (597mm)
width: 9.7" (247mm)
height: 6.8" (173mm)
Thickness: .040" (1.02mm)
Battery Tray Dimensions;
length: 6.89" (175mm)
height: 1.3" (33mm)
width: 1.7" (43mm)
Qty. Size Location Qty. Bearing Set
2 10x16mm Front Diff 1 ASCC9832
2 10x16mm Rear Diff 1 ASCC9832
2 15x21mm Front Uprights 1 DTXC1601
2 8x16mm Front Uprights 1 DTXC1585
2 15x21mm Front Bulkhead 1 DTXC1601
2 15x21mm Rear Bulkhead 1 DTXC1601
2 8x16mm Rear Axle 1 DTXC1585
2 5x11mm Transmission 1 DTXC1547
2 8x16mm Transmission 1 DTXC1585
jxs 01/14/15
&