(1) RC4WD R2 Black Crawler Transmission Made for hardcore rock crawler and custom truck builder!R2 Transmission is engineered for serious rock crawling and off-road conditions. With extremely low gear reduction and 5mm output shaft, it is designed to work with Tamiya TLT-1 axle. With side and bottom mounting holes, this transmission can be mounted on a variety of chassis and platform.
SPECIFICATIONS:
CNC machined billet aluminum housingUltra compact designExtremly durable heat treated steel gears5mm steel output shaftSupport 8T to 20T 32 pitch pinion gearsExtremely low center CGManufactured & engineered by RC4WD USAM3 side and bottom mounting holes10:1 to 30:1 Gear RatioProfessionally pre-asssembledFlanged metal shield bearingsCustom made round head stainless steel socket screwsOutput Shaft OD: 0.19" / 5mmHeight: 45mm (1.77inch)Width: 20mm (0.78inch)Length: 70mm (2.75inch)Weight: Not available yet
YOU WILL RECEIVE:
1x RC4WD R2 Black Crawler Transmission1x 8 Tooth pinion gear1x Clear dusk cover
NOTE:
R2 can be installed on TLT-1, but modification will be made on the chassis. R2 is strong enough to even run on TXT-1 size trucks.
NOTE:
One of the output shaft is much longer, it is designed that way so the prop shaft wont hit the motor. You can cut it shorter if you dont need the extra lenght. Click here to read an article on Scale 4x4 on how to cut the shaft.
NOTE:
We recommend use our Punisher Shaft (Part # Z-U0006)Gearing : 8T pinion = 30.4:1, 9T pinion = 27.0: 1, 10T pinion = 24.3:1, 11T pinion = 22.1:1, 12T pinion = 20.3:1, 13T pinion = 18.7:1, 14T pinion = 17.4:1, 15T pinion = 16.2:1, 16T pinion = 15.2:1, 17T pinion = 14.3:1, 18T pinion = 13.5:1, 19T pinon = 12.8:1, 20T pinion = 12.2:1
NOTE:
This item was previously part number X-0195. We have updated our part numbers and are sorry for any inconvenience this may cause you.