Insta-Cure+ 2 Oz. Ca Glue
Description
Insta-Cure+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, dont spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.
Manufacturer information
Compatible vehicles
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
707336108003
Additional details
Shipping weight
2.66 ounces
75.30 grams
0.17 pounds
Package dimensions
4.00 x 2.00 x 0.75
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️