Manchester, New Hampshire, USA

Open since 1987 | Online since 1996

Aluminum Servo Horn 25t spline M3 clamp 2 hole arm

Manufacturer

Tekno RC logo

Part number

TKR5253B

Real-time inventory

5 in stockClick to refresh

Price

$17.60
Sale -$1.61
$15.99

Description

TKR5253B Aluminum Servo Horn (25T spline, M3 clamp, double hole)
For: Futaba, Pro-Tek, Savox, Highest servos
The Tekno RC Aluminum Servo Horns were designed to minimize forces transmitted back to the servo spline. It utilizes a bottom mount design that, as opposed to a top mount, lowers the leverage point. This means your servos will be protected better to keep you in the race.
There are two mounting positions to fine tune your application. A hefty M3 locking screw ensures the servo horn will never come loose again. The M3 screw is also easy to tighten down compared to the smaller M2 screws that easily strip out on other servo horns. Use TKR1325 (M3x14mm flathead screw) for mounting the steering linkage to your Tekno RC vehicle. Use thread locking compound on all metal-to-metal connections.
These were designed specifically for the Tekno RC line of vehicles, but they can be used in most other applications as well.
**We strongly recommend using the inside (short) mounting hole for use in Tekno RC vehicles. This will make the steering response smoother and also protect your servo better.

Manufacturer information

Tekno RC logo

Tekno RC

10755 Scripps Poway Pkwy #598

San Diego, CA 92131

https://www.teknorc.com/

Alternate part numbers

Here are some alternate part numbers and product codes that you may find this part listed under on other sites:

0815076016585
TKRC9253
TKRTKR5253B
815076016585

Additional details

Shipping weight

0.48 ounces

13.61 grams

0.03 pounds

Package dimensions

2.50 x 2.50 x 0.25

⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️