Mitsubishi Lancer Evo.X Tt-02d 4WD Drift Spec Kit W/ Motor & Esc
Description
The Mitsubishi Lancer Evolution, also known as the Lancer Evo is a sports sedan manufactured by Mitsubishi Motors that is based on the normal Lancer. There have been ten official versions to date, and the designation of each model is most commonly a Roman numeral. All cars use two liter, turbocharged engines and all-wheel drive systems. The Evolution X variant was a fun and popular combination of rally-refined raciness and drivability. In 2007 it was released with a new DOHC 2-liter inline-4 boasting an aluminum block and giving 280hp. The production run ended in 2015 with the manufacture of 1,000 special "Final Edition" Lancer Evolution X's. Tamiya brings the Lancer Evolution X to the R/C hobby in the form of a Drift Spec assembly kit. The TT-02 chassis on which this Lancer Evolution is mounted on is an amazing machine. The TT-02 chassis is an entry level 4WD full independent suspension assembly kit that offers ease of assembly and easy maintenance. The TT-02D is the Drift Spec variant that includes special parts to make it a fun to drive drifting machine.
- 1/10 scale R/C model assembly kit
- Bathtub-type TT-02 shaft-driven 4WD chassis, compatible with TT-02 option parts
- Tamiya TBLE-02S ESC (capable of running 23T max brushed and 21.5T max brushless motors)
- Type 540 Sport-Tuned motor
- Aluminum motor heat sink
- Full shielded ball bearings
- Shaft driven 4WD
- Front/Rear 4-bevel resin differentials
- 4-wheel double wishbone suspension
- Front/Rear CVA oil shocks
- Clear polycarbonate body with decals and windowmasks
- Separately-molded side mirror and rear wing parts
- 24mm width drift-spec tires on mesh wheels
- 3-piece steering tie-rod
- Radio system (transmitter and receiver)
- Steering servo
- 7.2-7.4 volt battery pack & compatible charger
- Tamiya PS paint
- Width: 187mm
- Height: 139mm
- Wheelbase: 257mm
- Scale: 1/10
- Construction Type: Assembly kit
- Terrain Use: On-Road
- Chassis Type: TT-02D
- Chassis Material: ABS plastic
- Body Material: Clear polycarbonate
- Body Stickers: Included
- Bearings: Shielded ball bearing
- Differential Type: Gear
- Drive Type: Shaft, four wheel drive, axle dogbones
- Adjustable Gear Ratio: Yes
- Electronic Speed Control (ESC): TBLE-02 Capable of brushless & brushed motors (23T max Brushed, 21.5 max brushless)
- Motor: Sport-Tuned 540-brushed type
- Shock Damper: CVA oil-filled damper
- Steering: Bellcrank type
- Suspension: Fully independent double wishbone
- Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
- Bumper: Front, foam
- Tires: Slick rubber construction, Super Driftech 24mm wide
- Wheels: Silver colored mesh type, 1.9in diameter (48.2mm), 24mm wide, 12mm hex, +2 offset
- Gear Ratio: 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion)
- LED Light Buckets: No
- LED Lights: No
description revised by: SN October 9, 2019
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
75.78 ounces
2148.21 grams
4.74 pounds
Package dimensions
6.00 x 9.13 x 19.13
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️