Vanquish Yeti Currie F9 Front Bulkhead Clear Anodized
Description
Vanquish Products Aluminum Bulkhead for Axial Yeti
5x14x5 bearing upgrade to support pinion
One-piece bearing retainers support the ring gear bearings without risking crushing (patent pending)
Upper and lower bulkhead halves allow for removal of the ring and pinion without removing the A-arms
Styled after Currie Enterprises F9 IFS front housing
Includes the following:
1pc Currie F9 Bulkhead Base
1pc Currie F9 Bulkhead Cap
2 pieces One-piece Bearing Retainer
4 pieces M3x8 SHCS
4 pieces M3x10 SHCS
*For use in Axial Exo, use of adjustable toe blocks will cause interference with the center hinge pin support.
*Fitment of the hinge pins through the supports can be tight depending on the front bumper support and arms used. Install the hinge pins through the arm with the front bumper still loose.
5x14x5 bearing upgrade to support pinion
One-piece bearing retainers support the ring gear bearings without risking crushing (patent pending)
Upper and lower bulkhead halves allow for removal of the ring and pinion without removing the A-arms
Styled after Currie Enterprises F9 IFS front housing
Includes the following:
1pc Currie F9 Bulkhead Base
1pc Currie F9 Bulkhead Cap
2 pieces One-piece Bearing Retainer
4 pieces M3x8 SHCS
4 pieces M3x10 SHCS
*For use in Axial Exo, use of adjustable toe blocks will cause interference with the center hinge pin support.
*Fitment of the hinge pins through the supports can be tight depending on the front bumper support and arms used. Install the hinge pins through the arm with the front bumper still loose.
Manufacturer information
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
791512779156
Additional details
Shipping weight
2.90 ounces
82.21 grams
0.18 pounds
Package dimensions
7.25 x 3.75 x 0.25
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️