4mm Titanium Turnbuckle Kit for TRA Stampede 2WD
Description
YOU WILL RECEIVE:
2 - 4mm x 40mm Titanium Turnbuckles (Front Camber). When upgrading from plastic links, use with TRA rod end TRA5525.
2 - 4mm x 50mm Titanium Turnbuckles (Rear Camber). When upgrading from plastic links, use with TRA rod end TRA5525.
2 - 4mm x 60mm Titanium Turnbuckles (Steering). Rod end 5525 may be required. Refer to the exploded view of your particular model for what rod ends you have.
8 - 3mm x 16mm Screws. For use on front and rear camber links when upgrading from plastic links.
2 - 3mm x 20mm Screws. For use on outer front camber turnbuckle.
4 - 3mm Nylon Lock Nut. For use on outer front camber and outer steering link.
FEATURES:
4/5mm nut for easy turnbuckle adjustment.
Increased strength and reduction in weight compared to plastic and/or steel links.
Converts lower end models or older models to fully adjustable 4mm turnbuckles.
All necessary fasteners included for the conversion. (Rod ends are not included for those that are upgrading from plastic links or 3mm diamter tie rods. Rod ends needed are noted below).
Manufacturer information
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
683335027319
Additional details
Shipping weight
1.30 ounces
36.85 grams
0.08 pounds
Package dimensions
3.99 x 3.99 x 0.25
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️