Manchester, New Hampshire, USA

Open since 1987 | Online since 1996

1/8 Outcast 6s 4WD Blx Stunt Truck Silver

Manufacturer

Arrma logo

Part number

ARA106042T1

Real-time inventory

Out of stockClick to refresh

Price

$769.99
Sale -$220.00
$549.99

This part is not currently in stock.

Description

OUTCAST 6S BLX goes where it wants, which is anywhere it can express its attitude. OUTCAST 6S BLX is a rebel, designed to break conventions. OUTCAST 6S BLX is a dedicated action machine which will make YOU an RC truck stunt hero. 

FEATURES:

- Includes the following new details: Tower to Tower Braces, Inner Body Support, Sliding Motor Mount, Easy Access Center Diff, Never Lose Servo Saver, Never Lose Hub Nuts, Never Pop Steering Ball Links, Spektrum STX2 Radio, IC5 Battery Connectors
- Chassis: 0.12" (3mm) thick 6061-T6 aluminum, wheelie bar
- Drive: Four wheel with steel driveshafts
- Radio: Spektrum STX2, 2-channel with SRX200 receiver
- Steering Servo: ADS-15M waterproof metal gear with 195 oz-in (15 kg-cm) torque @ 6V and "never loose" aluminum servo saver
- Motor: BLX4074 2050Kv 4-pole non-sensored brushless (ARAG2000)
- ESC: Waterproof BLX185 150A 6S with built-in cooling fan, and IC5 battery connector (EC5 compatible)
- Shocks: 16mm anodized aluminum body, oil filled, aluminum top and bottom caps, 0.16" (4mm) diameter shaft, filled with 1000cst silicone shock oil
- Shock Towers: Black anodized aluminum 0.16" (4mm) thick
- Differentials: Three metal gear, front and rear filled with 10,000cst viscosity silicone diff oil, and center filled with 100, 000cst oil
- Body: Trimmed and painted with matte finish, high downforce wing, center support, internal protection roll bar
- Tires: dBoots BACKFLIP, diameter 6.8" (172mm), multi surface pattern
- Wheels: Bead diameter 3.82" (97mm), width 3.0" (77mm), 17mm hex nylon construction, matte black in color
- Ball Bearings: Full set included
- Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
- Warranty: Two year limited warranty beginning at date of purchase
- Designed FAST. With almost endless 6S brushless power on tap from the ARRMA BLX 185 brushless system, there is nothing holding back the OUTCAST 6S BLX. 
- OUTCAST 6S BLX is battle ready. Featuring a future styled retro truck bodyshell that sports aggressive bolt-on style over-fenders. 
- Designed TOUGH. With a 3mm thick anodized aluminum chassis, a strong center brace, three full-metal geared differentials, beefy suspension components and steel driveshafts throughout, the OUTCAST 6S BLX is ready for whatever you can throw at it. 
- Engineered to STUNT. The short wheelbase of the OUTCAST 6S BLX Stunt Truck means it performs wheelies, flips and tricks with ease. 
- The OUTCAST 6S BLX is primed for multi-surface driving action, no matter how hard the elements fight back. Complete with strong steel, lightweight aluminum and rugged composite materials; when you pilot the OUTCAST 6S BLX, you are in charge of a powerful force. 
- The OUTCAST 6S BLX features proven ARRMA tough parts. The battery mount system features two hook-and-loop straps fitted perpendicular to each other to provide a secure fit for your battery packs. High-wall front and side dirt defenders protect the electronics and the center transmission. 
- Defy the laws of physics. OUTCAST 6S BLX performs flips, wheelies and stunts with ease. 
- Big air, back flips, tricks and stunts. Anything seems possible with the OUTCAST 6S BLX. 
- A wheelie bar is integrated into the wing mount. It allows long, high angled wheelies. A scale rear wing aids high speed stability and adds to the cool looks. 
- Soaking-up a wide range of surfaces is made easy with the included red anodized adjustable shocks. Factory set to handle everything from fast speed runs to snow and mud chucking, no matter where you choose to bash, these high-quality units will keep you stable and in-control. Shock cap protectors fitted to the OUTCAST 6S BLX prevent shock cap damage during upside-down moments. 
- An all-new sliding motor mount is included. This is precision manufactured from high-quality aluminum and anodized in ARRMA red. The sliding motor mount allows the motor position to be adjusted with the loosening of two screws that are accessed from above, significantly simplifying adjustment of the gear mesh and pinion changes. 
- The OUTCAST 6S BLX bodyshell is equipped with a roll-cage fitted with sacrificial screws. This protects the roof of the bodyshell from wear when sliding along, upside-down, at 60mph. A tough molded composite body support brace is attached to the underside of the body. This interfaces with the center roll hoop on the vehicle chassis, offering roll-over protection for the body. A molded composite roll hoop on the center section of the chassis provides support for the body from underneath. This increases the durability of the body during upside down action. 
- A center brace adds longitudinal support to the chassis plate for maximum durability. This is attached to specifically designed mount at the front of the vehicle. The center brace is securely attached to a specifically designed mount at the rear structure of the vehicle. 
- The OUTCAST 6S BLX now features a never-loose aluminum servo saver. With no adjustment nut to loosen, this design offers a fit-and-forget setting for the servo saver. 
- For ease of maintenance the OUTCAST 6S BLX now features an easy-access center differential and sliding motor mount. The motor can be taken out by removing two screws. The center differential can be taken out by removing seven screws. 
- Never-pop pivot ball joints keep the steering links attached to your vehicle however manic the action gets. 
- New designed hub nuts feature integrated o-rings that keeps them in position. 
- dBoots 'Back-Flip' multi-surface tires provide awesome traction allowing you to flip, grip and perform tricks. They are mounted on tough five-spoke wheels. 
- Equipped with three metal-geared differential units, as standard, ARRMA understand the importance of durability and control. Easy-access front and rear diff units will allow you to carry-out maintenance in minutes. This means you spend less time wrenching, so you can have more time bashing. 
- The included BLX185 150A waterproof ESC provides consistent power control and is 6S LiPo ready. Fitted with reliable IC5 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX185 ESC has over-voltage protection, and a two-stage LiPo cut off for added cell management. The fitted 10AWG high-quality wires and 6V BEC unit are combined with a three-mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience. 
- The BLX 2050kV brushless motor provides speed and torque and is perfectly balanced for use with the BLX185 ESC unit. A beautifully etched black aluminum motor can provides a premium look, whilst a four-pole internal configuration keeps the power supply smooth and consistent. Gold bullet connectors allow fast and easy wire removal when you need to clean your vehicle. The aluminum motor can offers increased heat dissipation from the finned body section. A dual motor shaft flat section provides safe and secure pinion gear fit. 
- IC5 connectors can handle the power required when the action gets furious. They provide a reliable connection between your ESC and your chosen battery packs. 
- The Spektrum STX2 radio system offers fast and consistent control for your ARRMA vehicle. Using 2.4Ghz technology, your ARRMA vehicle is controlled by a wheel and trigger style radio transmitter. Ideal for new RC users and experienced bashing fans alike. Adjustable steering and throttle trim will allow you to easily tune your control experience to suit your individual needs. 
- The ADS-15M steering servo benefits from metal gears and is fully waterproof. To provide fast and consistent steering response, the ADS-15M has 208oz-inch (15kg-cm) of torque at 7.2v. At 1.6 x 0.8 x 1.5" (41 x 20 x 38mm) in size, this high-power steering servo is compact and highly capable. 
- Fully waterproof ESC, steering servo and radio receiver box are standard. This means that hitting the roughest terrains, in the most extreme conditions, will be no problem. Rain, mud, snow, dirt and anything else you want to bash your way through. ARRMA waterproof electronics are ready for action. For details on waterproof standards, please refer to the product instruction manuals
- ARRMA will support your investment for two years. With our impressive limited warranty helping to keep you running for longer. Visit our Support page to learn more about this great feature.

YOU WILL RECEIVE:

- RTR Arrma Outcast 6S BLX Stunt Truck
- Painted Body
- 2.4GHz Radio
- Waterproof Steering Servo and Receiver Box
- BLX185 ESC
- 2050KV brushless motor
- 12T Pinion Gear
- Pinion Gear
- 50T Spur Gear
- Instruction Manual
- Two IC5 Battery Connectors
- Bridging Wire for single pack use

REQUIREMENTS:

- LiPo Battery: One 4S or 6S battery with IC5 or EC5 connector, or two 2S or 3S batteries with IC5 or EC5 connector
- Recommended battery specification: 5000mAh - 35C minimum - per battery pack
- Battery Charger: To match selected battery
- AA Batteries: Four for transmitter
- LiPo charging bag & track equipment

SPECIFICATIONS:

- SCALE: 1/8
- MAX SPEED POSSIBLE: 60+mph / 96+km/h
- POWER TYPE: Brushless
- BUILD STATUS: RTR
- BUILD CONFIGURATION OPTIONS: Mid Motor
- DRIVE TYPE: 4WD
- VEHICLE TYPE: Stunt Truck
- SURFACE: Off-road
- LENGTH: 540mm / 21.26"
- WHEELBASE: 328mm / 12.91"
- RIDE HEIGHT: 47mm / 1.85"
- FRONT WIDTH: 461mm / 18.15"
- REAR WIDTH: 461mm / 18.15"
- HEIGHT: 230mm / 9.06"
- LOCKING DIFFS: No
- NUMBER OF DIFFERENTIALS: 3
- WEIGHT (NO BATTERY): 5.17kg / 11lbs 6oz
- BATTERY MAX: 158x48x70mm / 6.22x1.89x2.76"
- WARRANTY LEVEL: 2 Year Limited
- Internal Gear Ratio: 4.3
- Final Drive Ratio: 17.92:1
- Final Gear Ratio Range: 9.77 - 17.92
- Gear Pitch: 1.0 Module
- Spur Gear: 50T
- Pinion Gear: 12T
- Torque Split: 50/50
- Front Spring Rate: 1.09N/mm
- Rear Spring Rate: 0.87N/mm
- Diff Crown Gear Specification: 43T 0.9m
- Diff Pinion Gear Specification: 10T 0.9m
- Body: length: 18.5" (470mm); width: 8.4" (214mm) measured at wheel flares, widest point; height: 4.6" (118mm) measured at roll bar


description revised by: SN July 8, 2019

Manufacturer information

Arrma logo

Arrma

3002 N. APOLLO DRIVE, SUITE #1

CHAMPAIGN, IL

https://www.arrma-rc.com/

All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.

Compatible vehicles

1:8 4x4 Outcast BLX 6S

Alternate part numbers

Here are some alternate part numbers and product codes that you may find this part listed under on other sites:

5052127032100

Additional details

Shipping weight

288.00 ounces

8164.66 grams

18.00 pounds

Package dimensions

25.75 x 19.50 x 11.00

⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️