Input Voltage: 2-3S LiPo/5-9 Cells NiMh
Built-in Powerful Switch-mode BEC
BEC Output Voltage-Current: 6V / 7.4V @ 8A
Cont. / Peak Current : 80A / 400A
Applicable to All Weather Conditions
Multiple Protection Functions: Low Voltage Protection, Over-temperature Protection
Recommended Motors: 540 /550 / 775 Motors
Size: 1.96 x 1.68 x 1.04in / 50 x 42.9 x 26.5mm
Program Card Working Voltage: 5.0V - 8.0V
Program Card Size: 1.53 x 0.47 x 22.0in / 38.9 x 12.0 x 55.9mm
Total Weight: 1.37oz / 110.5g
Battery Plug: XT60
1x Outcry Extreme Speed Controller ESC
1x LED Program Card
1x XT60 Female to Tamiya Male Connector Adapter
1x Extension Wire 150mm
Prior to proceeding, be sure to either remove the pinion from the motor or elevate the truck so the wheels are not able to touch the ground.
Do not touch this product while in use to avoid injury. Product emits heat and thus, the heat sink may become extremely hot.
This product is water-resistant.
Begin using your ESC by calibrating with your transmitter. We strongly recommend all users to use the Fail Safe function on the radio system and set (F/S) to Output OFF or Neutral Position . Example of calibrating Neutral range and Endpoint.