X-Factor 13.5t Certified Plus Spec 1-Cell On-Road Sensored Brush
Description
Weight (144g avg)
New Composite Sensor Board
0 - 60 Degrees of Timing adjustment
Revolutionary timing ring & locking end plate systems saves weight Only 6 short screws (no long screws)
X-Flow Cooling which pulls more air through the can, reducing motor temps
2pc CNC Machined Aluminum can allows for more accurate deviation readings
2mm Ultra Low Resistance Solder Tabs
New Stator Design provides a more efficient power curve NO FADE!
2650Kv this number is approximate set as Zero Degrees of Timing. Sensored brushless Motors are not rated in Kv's due to the fact that timing and voltage can effect the Kv number.
13.5T comes built stock with the torque and punch of the TEP1119
12.5 x 25.5mm Long
High Torque Rotor - Copper
CERTIFIED Plus SPEC
Custom built and hand assembled just like our Team Driver Motors
Buying a Certified Motor is the closest anyone can get to buying a Trinity Team Motor. Example: Asymmetry in a brushless motor could be anywhere from "0" to "30 plus". Certified Plus will have no higher than a "4" so you never see a rotor higher than a "4" in the "PLUS" line.
The other advantage will be each and every CERTIFIED Plus SPEC motor will comes with a complete print-out after running the motor on the Motolyser.
Rotor precision shimmed and aligned
Sensor Board adjustment and timing set for motor application
Each Motor with come Built with a CERTIFIED Top 5% Rotor and Stator
Certified Plus SPEC Featured Upgrades:
Certified Red Seal Ceramic Bearings (TEP1738 Installed)
Special Certified Black Anodized End Plate (Only Available with a Certified Motor)
Complete 6pc Silver Aluminum Screw Kit (REV1131 Installed)
Revtech Blue Chrome Motor Box
Top 5% Stator and Rotor
All Certified Plus SPEC Versions are Built with a TOP 5% Rotor and Tuned to your selected application.
12.5 x 25.5mm Long
High Torque Rotor - Copper
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
6.80 ounces
192.78 grams
0.42 pounds
Package dimensions
4.50 x 3.25 x 2.00
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️