Manchester, New Hampshire, USA

Open since 1987 | Online since 1996

S9151 Servo Digital Rudder

Manufacturer

Futaba logo

Part number

FUTM0211

Real-time inventory

Out of stockClick to refresh

Price

$149.98
Sale -$59.99
$89.99

This part is not currently in stock.

Description

This is the S9151 Digital High Torque Rudder F3A Servo. This can only be used with 4.8V batteries. This servo can produce high-current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps.
FEATURES:
Digitally enhanced microprocessors cut about 1/2 of the response time from transmitter input to servo reaction. Digital operation allows this servo to reach full power immediately and maintain torque longer. High-capacity, high-current wire with low resistance Coreless motor (a wire cage rotates around the magnet). High speed operation for immediate response Nylon gears Dual ball bearings on the output shaft Delivers high torque rudder operation for precision fixed-wing F3A pattern aircraft. Dust and water resistant (Not Waterproof) Black plastic case. One year warranty.
YOU WILL RECEIVE:
One S9151 Digital High Torque Rudder F3A Servo w/Futaba J Connector and a small round servo horn Four Rectangular Grommets Four Brass Bushings Four 2 x 11mm Mounting Screws One Large Round Horn One Six Arm Horn One Four Arm Horn
SPECIFICATIONS:
DIMENSIONS:
1.6 x 0.8 x 1.4" (40 x 20 x 37mm) Weight: 1.8oz (50g) Speed: .19 sec/60° @ 4.8V Torque: 132 oz-in (9.5 kg-cm) @ 4.8V Power Supply: 4.8V (Futaba does NOT recommend using 6V)
FEATURES:
S9151 Digital Servo Precautions, -It is best to avoid long leads and Y-harnesses especially with standard grade wires. If problems are encountered, consider using heavy duty wire such as Futaba's Heavy Duty Series or Hobbico's Pro Series, minimizing lead lengths, and/or removing Y-harnesses. -Current Drain: Futaba S9151 Servo is specially designed for high- torque and high-speed, therefore very high current drain is normal at startup. For ultimate performance when using this servo, please review the following points. (1) When using systems with the battery fail safe function it has a higher cut-off voltage setting which will cause shorter operation time. (2) When installing the servo please check pushrod linkage to make sure there is no binding in order to prevent excessive power consumption and decrease the life of the motor and battery. This digital servo cannot be used with the following * AM * transmitters as the servo neutral signal is: 1310us). CONQUEST AM, FG Series (T4FG, T5FGK,T6FG, T6FGK, T7FGK), New Terratop, T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK series. **** Otherwise they will work fine with current AM systems ***** JAL 2/27/01 ir/jl updt jxs 10/31/03 updt jxs 11/01/04 &

Manufacturer information

All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.

Alternate part numbers

Here are some alternate part numbers and product codes that you may find this part listed under on other sites:

FUTS9151
4513886200717
669962292726

Additional details

Shipping weight

2.72 ounces

77.12 grams

0.17 pounds

Package dimensions

7.00 x 3.13 x 1.13

⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️