Drive bevel - diff gear
Description
This is a Hardened Version of the Larger of the Two Beveled Gears Used in the
Front and Rear Gearboxes of the Kyosho INFERNO, TURBO INFERNO, INFERNO DX,
DX II and USA-1 Nitro Crusher. This Gear is Attached to the Plastic Diff
Case with four 3mmx10mm screws.
Hardened Material for Extra Strength.
Black Outer Coating to Prevent Corrosion.
Standard Course Kyosho Pitch Teeth.
Direct Bolt-On Fit.
One 43 tooth Hardened Beveled Gear.
Part is a direct bolt on fit, but modeler must replace the Small
Beveled Gear (KYOC3321), the Diff Housing (KYOC3306)(this is the
inner part of gear) and use a Shim Set (KYOC5573) to adjust mesh.
Part has the same mounting dimensions and specs as the orginal, a
outer diameter of 1.72" a inner diameter of .55" and is .3" thick.
The hardened small drive gear is KYOC3321.
The more economical non-hardened version of this gear is KYOC3320.
WLG 10-21-98
ir/jl
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
1.06 ounces
30.10 grams
0.07 pounds
Package dimensions
2.00 x 3.00 x 0.25
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️