50mm Monster Blower Motor Cooling Fan Kit TRA E-Revo 2
Description
This is the Hot Racing Monster Blower clip-on universal heat sink and fan for the TRA E-Maxx, E-Revo 2.0, or any other custom project
- Large 50x50x10.3mm 7-blade fan
- Clip-on design for simple installation
- Black and Blue anodized aluminum heat sink provides efficient heat transfer
- Adapter with TRA-style connectors
- 24AWG silicone wire
- One (1) TRA-style adapter connector
- Recommended to loosen fan screws during installation, then tighten again after installation. This will help minimize tweaking and binding the fan.
- Medium strength thread lock (blue threadlocking compound) on fan mount screws
- Ensure fan blades are protected
- This system uses a TRA-style connector. If your system uses another type of connector you'll have to switch connectors or use an adapter.
- Input Voltage: 11.1V (12V max)
- Fits motors with a can diameter of 1.6 inches (40mm)
description revised by: SN February 18, 2019
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
2.20 ounces
62.37 grams
0.14 pounds
Package dimensions
2.25 x 3.50 x 2.25
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️