6 Cell Monster Blower Motor Cooling Fan Kit Arrma 1/8
Description
- Large 50x50x11mm 7-blade fan
- Clip-on design for simple installation
- Black and Red anodized aluminum heat sink provides efficient heat transfer
- Adapter with EC5
- 12AWG and 24 AWG silicone wire
- One (1) EC5-style adapter connector
- Recommended to loosen fan screws during installation, then tighten again after installation. This will help minimize tweaking and binding the fan.
- Medium strength thread lock (blue threadlocking compound) on fan mount screws
- Ensure fan blades are protected
- This system uses a EC5 Connector. If your system uses another type of connector, you'll have to switch connectors, or use an adapter. See Hot Racing MH505F02 for equivalent system with a Deans-style connector.
- Input Voltage:22.2V (24V max)
- Fits motors with a can diameter of 1.6 inches (40mm)
- For two 3 cell pack Best use AON505F06
- Replacement Hot Racing 50x50x11mm fan is MH505F8
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Compatible vehicles
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Related parts
Additional details
Shipping weight
2.46 ounces
69.85 grams
0.15 pounds
Package dimensions
3.99 x 3.99 x 0.95
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️