Gt-3 silver mini-z a3
Description
This is a 1/28 scale Kyosho Mini-Z, Silver Porsche 911 GT-3 Racer.
(R/C Minimized Racing Car)
No Gluing or Painting, Race-Ready, Right Away!
FEATURES:
Ready-to-Run with Pre-Installed Electronics and Radio Equipment.Small size makes it easy to race in a small area.
Coil-over spring shock on front upper a-arms for realistic suspension
action.
High-grip rubber slick tires on stylish wheels.
Rear T-bar that compensates for any imperfections in the driving
surface to provide maximum traction. The T-bar also controls the
adjustable wheelbase.
FA-130 electric motor delivers strong power output for exciting
racing, with adjustable mounting positions to increase traction or
add stability.
Rugged pre-painted polystyrene body.
Specially designed mini servo to provide fully proportional steering,
even at low speeds.
Receiver, servos and linkages are all pre-installed in the car for
convenience.
Kyosho Perfex digital proportional 2-channel radio has the following:
Adjustable steering dual rate.
Steering and throttle trims.
Servo reversing switch.
LED battery power indicator.
Retractable antenna.
Charging jack for optional NiCD rechargeable battery (not included)
(See COMMENTS)
Micro receiver with efficient, FET high-frequency amplifier.
One Micro Servo and high frequency electronic speed control.
Adjustable Wheelbases of 126mm, 130mm, 134mm
INCLUDES:
One Ready-To-Run Silver Porsche 911 GT-3 Mini-Z Race Car withPerfex KT-2 Radio System
Three Orange Road Cone Pylons
Three Orange Road Marker Discs
Three Extra Pinions (7T,8T,9T)
Three Motor Spacers for different pinions used
One Motor Case Mount B for optional high motor mounting
One Wheel/Pinion Wrench
One Instruction Manual
REQUIRES:
Attaching the body to the chassisInstalling transmitter antenna into transmitter
Installing alkaline batteries into transmitter and car
(4) AAA size alkaline batteries for the car
(8) AA size alkaline batteries for the transmitter
SPECS:
Chassis-Length: 5.1" (130mm)
Width: 2.6" (65mm)
Height: 2.2" (56.5mm)
Weight: 5.8oz (163g)(approximately overall)
Minimum Turning Radius: 7.9" (200mm)
Body-
Length: 6.6" (167mm)
Width: 2.6" (67mm)
Wheelbase: 3.5" (90mm)
Height: 1.5" (40mm)
COMMENTS:
Charging Jack is functional. Use a Futaba-style transmittercharging system with this jack, HCAP6010 or DTXP4010.
Length of chassis is adjustable to accommodate different body sizes.
The adjustable wheel base lengths are:
Short 86mm
Medium 90mm
Length 94mm
Motor height is adjustable for different bodies.
For the optional bearing set, use DTXC1386.
JAL 1/26/01
ir/jl
this information was sourced from Great Planes Model Distributors
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
36.80 ounces
1043.26 grams
2.30 pounds
Package dimensions
0.00 x 0.00 x 0.00
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️