M6 Driveshafts and Hub Carriers Slash Rear 6mm
Description
The Tekno RC M6 Driveshafts and Rear Hubs will give your Slash 44, Stampede 44, Rustler 44, and Hoss the ultimate in performance and durability.
If you are having issues with anything breaking this will most likely be caused by running the RPM A-Arms made from pure nylon. These arms are not compatible with our kit as they are too flexible. Because of this extreme flexibility, the metal parts of our kit are compromised during use. For this reason, we can only recommend using the stock TRA arms.
Bigger bearings for better load handling 10x15x4 inner and a 6x12x4 outer bearing (stock is 5x11x4 inner/outer)
Hardened steel driveshafts and drive cups
Captured CV drive pin it can t fall out.
New M6 rear hub design with multiple camber link locations
Includes two sets of rear hubs (0.5 and 1.5 degrees). 1, 2, 3, and 4 degree settings available.
Reduces slop
Stock wheels and nuts fit with no mods
Metric hardware throughout
17mm adapter option (sold separately)
Requires
Screw pin from the original TRA output yoke (TRA6828X M3 Screw Pin)
This item fits the following: This driveshaft kit is compatible with the Slash 4x4, Rustler 4x4, Stampede 4x4, and the HOSS. They are a direct fit for these vehicles and do not require any additional parts.
If you are having issues with anything breaking this will most likely be caused by running the RPM A-Arms made from pure nylon. These arms are not compatible with our kit as they are too flexible. Because of this extreme flexibility, the metal parts of our kit are compromised during use. For this reason, we can only recommend using the stock TRA arms.
FEATURES:
Custom 6mm stub axles no more bending or breakingBigger bearings for better load handling 10x15x4 inner and a 6x12x4 outer bearing (stock is 5x11x4 inner/outer)
Hardened steel driveshafts and drive cups
Captured CV drive pin it can t fall out.
New M6 rear hub design with multiple camber link locations
Includes two sets of rear hubs (0.5 and 1.5 degrees). 1, 2, 3, and 4 degree settings available.
Reduces slop
Stock wheels and nuts fit with no mods
Metric hardware throughout
17mm adapter option (sold separately)
Requires
Screw pin from the original TRA output yoke (TRA6828X M3 Screw Pin)
This item fits the following: This driveshaft kit is compatible with the Slash 4x4, Rustler 4x4, Stampede 4x4, and the HOSS. They are a direct fit for these vehicles and do not require any additional parts.
Manufacturer information
Compatible vehicles
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
TKRTKR6852X
815076010156
Additional details
Shipping weight
3.84 ounces
108.87 grams
0.24 pounds
Package dimensions
7.50 x 4.75 x 0.88
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️