Aluminum Axle Tube Kit - Tamiya Clod Buster
Description
- Smaller c-hub make it for possible 2.2 in wheel
- CNC 6061-T6 Aluminum construction, silver in color
- These tubes will increase the drive shaft strength of your Clod rock crawler
- This kit requires a linked suspension and is NOT compatible with the factory radius arm (ladder bar) suspension
- Four (4) 8x5x2.5mm bearings
- Four (4) brass bushings
- Four (4) screws
- One order completes one axle. Order sets to complete one model.
- This kit requires a linked suspension and is NOT compatible with the factory radius arm (ladder bar) suspension
- Approximate width: 63.8mm) at the gearbox (54mm) at the upright
- 5x8mm bearing can be use in place of the bushing
- Replacement/spare hardware kit is Hot Racing RCB20EL08
description revised by: SN April 15, 2015
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Related parts
Additional details
Shipping weight
2.50 ounces
70.87 grams
0.16 pounds
Package dimensions
7.00 x 5.00 x 0.25
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️