E-Z Adjust Aluminum 3-Shoe Flywheel Kit Traxxas

This part is discontinued and we no longer carry it.

Manufacturer

Part number

TRX100AC306

Real-time inventory

Out of stockClick to refresh

Price

$43.88

This part is discontinued and we no longer carry it.

Description

Hot Racing 3-shoe clutch and flywheel with three tuning spring options for the TRA Revo, T-Maxx, Nitro Rustler, Nitro Sport, Nitro Stampede, and Jato (works with 2.5, 2.5R, and 3.3 engines)

FEATURES:

- Light weight flywheel constructed of CNC machined 6061-T6 aluminum, anodized blue
- Spring steel clutch springs with three spring options: soft black (0.93mm), medium gold (0.99mm), hard silver (1.09mm)
- CNC machined 7075-T6 aluminum clutch shoes, anodized silver
- One lightened clutch shoe to slightly soften clutch engagement and reduce harsh clutch grab

YOU WILL RECEIVE:

- One (1) flywheel
- Three (3) clutch shoes
- One (1) brass flywheel collet
- Three (3) clutch spring sets (soft black, medium gold, hard silver)
- One (1) nut
- One (1) installation tool

REQUIREMENTS:

- Installation: Use the provided tool and nut. The tool can be turned by inserting a small screwdriver or hex wrench through the hole in the end of the tool.

SPECIFICATIONS:

- Flywheel outside diameter: 1.38 inch (35.1mm)
- Collet natural inside diameter: 0.28 inch (7.0mm)
- Black spring wire size: 0.93mm
- Gold spring wire size: 0.99mm
- Silver spring wire size: 1.09mm

COMMENTS:

- Changing springs:
- 1.) Note orientation of shoes and springs
- 2.) Remove steel shoe retainer plate by gently prying it off with a flat head screwdriver
- 3.) Change springs and reinstall shoes and springs on the pivot pins
- 4.) Insert tool into steel shoe retainer plate; tool has three nubs that engage with three openings in retainer plate
- 5.) Align steel shoe retainer plate with clutch and, while providing downward pressure, rotate the tool counterclockwise until the retainer plate is fully inserted into clutch and aligned with shoe pivot pins. The tool can be turned by inserting a small screwdriver or hex wrench through the hole in the end of the tool.
description revised by: SN August 20, 2018

Manufacturer information

Hot Racing

140 Hayward St

Manchester, NH 03103

https://www.hot-racing.com/

All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.