Manchester, New Hampshire, USA

Open since 1987 | Online since 1996

M6 Driveshafts and Hub Carriers (2WD Slash or Stampede)

Manufacturer

Tekno RC logo

Part number

TKR1951X

Real-time inventory

3 in stockClick to refresh

Price

$71.50
Sale -$6.51
$64.99

Description

The Tekno RC M6 Driveshafts and Rear Hubs will give your 2WD Electric Slash/Nitro Rustler/Nitro or Electric Stampede, the ultimate in performance and durability.
FEATURES:
Custom 6mm stub axles no more bending or breaking
No Telescoping = NO BINDING
Bigger bearings for better load handling 10x15x4 inner and a 6x12x4 outer bearing (stock is 5x11x4 inner/outer)
Hardened steel driveshafts and drive cups
Captured CV drive pin it can t fall out.
New M6 rear hub design with multiple camber link locations
Includes two sets of rear hubs (0.5 and 1.5 degrees). 1, 2, 3, and 4 degree settings available.
Reduces slop
Stock wheels and nuts fit with no mods
Metric hardware throughout
NOTE:
This product may not be compatible with the new TRA 272R Transmission.
NOTE:
At this time we don t have a kit solely for the 2WD Electric Slash with Protrac arms, But you can purchase these parts below and make the 2WD Slash kit work for the Protrac equipped counterpart. You will need TKR1951X and TKR2210 for the Electric 2WD slash with Protrac arms. The TKR2210 replaces the CVD s in the 1951X kit to make the kit fit on the Protrac equipped 2WD Slash. The 2210 CVD is a little longer than the 1951X CVD which is needed to fit the Protrac s longer arms for 2WD electric Slash.

Manufacturer information

Tekno RC logo

Tekno RC

10755 Scripps Poway Pkwy #598

San Diego, CA 92131

https://www.teknorc.com/

Alternate part numbers

Here are some alternate part numbers and product codes that you may find this part listed under on other sites:

TKRTKR1951X
815076010439

Additional details

Shipping weight

3.84 ounces

108.87 grams

0.24 pounds

Package dimensions

8.00 x 5.25 x 1.13

⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️