Black 2.2 Revolver Rock Crawler Wheels Narrow Wheelbase (2)
Description
- Black 10-hole pattern design
- Reinforced for strength and minimal weight
- Made of a nylon material
- Uses 12mm hex & max axle size is 6mm
- Two 10-hole narrow wheelbase black wheels
- One RPM decal
- Installation on tires
- Tire Glue DTXR2000, DTXR2002
- diameter: 2.44" (62mm)
- width: 1.61" (41mm)
- Backspacing: .69" (17.5mm)
- Wheel Hex: .47" (12mm)
- Min. Axle length: .42" (10.5mm) from the hex face to the end of the axle
- Max. Axle Dia. : .196" (5mm)
- These wheels will also fit on the TRA Slash with some modifications. Some body trimming may be necessary due to the wider Revolver wheels. The included 4.5mm hex adapters must be used for accurate back spacing and for the wheel nut to hold properly. Finally, the inner and outer bead diameters are the same size so the stock TRA tires won't fit. Tires such as the Pro-Line Switch, PROC1077 must be used. HPI and other manufacturers also make tires that fit.
description revised by: SN September 19, 2018
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Compatible vehicles
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
2.24 ounces
63.50 grams
0.14 pounds
Package dimensions
4.88 x 4.25 x 2.88
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️