Dig Unit for Stock Axial Transmission
Description
- A third channel on the radio allows the dig unit to function remotely
- Linear bushings for smooth shift action
- Hardened steel outdrive and output shaft
- Aluminum servo mounting plate and servo mount posts
- Black anodized aluminum components
- One (1) steel transmission outdrive dog
- One (1) servo mounting plate
- Two (2) servo mount posts
- Shift linkage
- Installation hardware
- Standard servo and servo arm
- Three or more channel radio system
- Rear plastic telescoping drive shaft needs to be cut
- Light oiling of the shift bushings
- SCX10 needs Hot-Racing SCP39SM01, On Board Servo Mount
- Medium thread lock (e. g. blue Loctite) on screws
- Servo mounting plate distance between end holes: 116.5mm
- Servo mounting plate slots centered on square pattern: 40x81mm
description revised by: SN June 18, 2018
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
3.88 ounces
110.00 grams
0.24 pounds
Package dimensions
5.00 x 4.00 x 4.00
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️