HPI Nitro RS4 Mt Aluminum Rear Knuckle Arms
Description
This is a set of optional Aluminum Knuckle for the HPI
Nitro RS4, Mt Mt2 Super nitro etc.
Constructed of durable milled aluminum, anodized purple in color
Keep the rear wheels pointed where they should! These hubs will remove the flex found in your stock plastic parts. (2 Deg Toe)
Two Aluminum Knuckle for the HPI RS4 with 2 aluminum ball end
Installing at each wheel
Camber mount are 3mm thread. (DO NOT use 4/40 ball end)
For Old Nitro RS4, N. RS4 RTR, Nitro 2, Nitro MT (MT Racer) Best use steel 3mm ball end. (NRS4022A)
When using aluminum ball ends,
Pleaseremenber not to "force it" and use some light oil on the treads to prevent binding. Otherwise, ther is a risk of damaging your new part.
For Super Nitro, Nitro RS4 Racer use 188F36 (flat head 3x16screw)
For Super Nitro Rally, Racer 2, use 188P312 (3x12 screw)
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Compatible vehicles
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
0.70 ounces
19.84 grams
0.04 pounds
Package dimensions
2.50 x 2.50 x 0.50
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️