S148 Analog Servo Precision 0.28 sec 42 oz-in
Description
The S148 Standard Servo yields increased power and speed with a reduced size
and weight compared to the S128, yet uses the same gears and servo cases.
This servo is a replacement for the following servos. (S6, S17, S18, S23, S26, S28
S38, S128)
This servo can produce high-current draw from your batteries.
If using NiMh or LiPo batteries, make sure they are capable
of delivering sufficient amps.
bushing
One accessory package with round rubber grommets, brass eyelets,
mounting screws, round and star shaped servo horn
Nylon gears
One year warranty
Motor: 3-pole
Power requirement: 4.8V or 6V (from receiver)
Power consumption: 6V 8mA (at idle)
Torque: 33 oz-in (2.4 kg-cm) @ 4.8V
42 oz-in (3.0 kg-cm) @ 6V
Transit Time: 0.28 sec/60 @ 4.8V
0.22 sec/60 @ 6V
(40 x 20 x 36mm)
Weight: 1.6oz (1-9/16oz) (44g)
Mounting on-center dimensions
width: .4"
length: 1.9"
Shaft diameter: 5.88mm
ir/jl
updt jxs 10/29/03
ir/jxs
updated mcw 5/19/04
updt jxs 10/29/04
updated jpg 10/24/07
Updated JAW 11/27/07
&
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
2.40 ounces
68.04 grams
0.15 pounds
Package dimensions
2.00 x 3.00 x 4.50
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️