Hardened Steel Spur Gear (72t 48p)(Red) - TRA
Description
- Replaces stock nylon spur gear
- Black oxide coated gear for durability and corrosion resistance
- Red anodized countersunk aluminum washers
- High strength hardware
- Three (3) mounting screws
- Three (3) red anodized countersunk washers
- Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
- Gear Pitch: 48 pitch
- Mounting Holes: 3
- Tooth Face width: ~5mm
- Motor should no way exceed 180F (over 160F is not recommended). ESC should not exceed 160F. Excessive temperatures will shorten the life of the motor and ESC.
- This spur gear is significantly smaller than the stock gear and will require a larger pinion gear for fitment. Consider a pinion gear in the 25-34 tooth range.
description revised by: SN July 19, 2017
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Compatible vehicles
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Related parts
Additional details
Shipping weight
0.79 ounces
22.46 grams
0.05 pounds
Package dimensions
2.00 x 3.00 x 0.60
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️