Manchester, New Hampshire, USA

Open since 1987 | Online since 1996

Foam-Cure 1 Ounce

Manufacturer

Bob Smith Industries logo

Part number

BSI141

Real-time inventory

Out of stockClick to refresh

Price

$3.49
Sale -$0.50
$2.99

This part is not currently in stock.

Description

FOAM-CURE is a silicone based adhesive that works very well on EPP and EPO foams. It is crystal clear and cures to a more flexible consistency than CA. It is, however, not instant bonding like CA and there is no accelerator to speed its curing. To obtain a faster initial bond when bonding two pieces, FOAM-CURE can be applied to one piece and after the two are joined, they can then be pulled apart. After letting it air dry for about ten minutes, FOAM-CURE will act like a contact cement when the parts are rejoined, resulting in enough tack strength to allow the next steps of assembly. Full strength is reached in 10-12 hours. FOAM-CURE works with all foams, and will actually bond most other materials. It will bond wood and plastic to foam, and is a good canopy glue. FOAM-CURE does not, however, cure flexible enough to act as a hinge for aircraft control surfaces. Its limitations occur when bonding large areas of two non-porous materials. FOAM-CURE requires exposure to air for drying. If one tried to bond, for example, a half-dollar coin to glass, over 90% of the adhesive would never cure, since the solvent it contains would have no where to evaporate. A small amount of denatured alcohol can be mixed into the Foam-Cure to make it thinner.

Manufacturer information

Bob Smith Industries logo

Bob Smith Industries

155 Cow Meadow Place

Paso Robles, CA 93446

https://www.bsiadhesives.com/

Alternate part numbers

Here are some alternate part numbers and product codes that you may find this part listed under on other sites:

707336141000
707336141000

Additional details

Shipping weight

1.40 ounces

39.69 grams

0.09 pounds

Package dimensions

6.50 x 1.20 x 1.20

⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️