Mamba X Sct Sensored 25.2v Waterproof 1415-2400kv Combo
Description
- 2S - 6S input voltage range
- Smartsense uses motor's sensors for smooth starts, excellent torque and low-speed drivability - then transitions to the sensorless mode with electronic timing, Smartsense automatically advances timing for peak performance during all driving conditions
- On-the-fly adjustments can be made through the AUX wire once enabled in Castle Link, then settings can be tuned from transmitter while driving
- Recordable real-time data such as RPM, battery current and voltage, ESC and motor temperature, throttle input and more
- Audible alerts
- CNC aluminum case
- 12AWG high strand count silicone insulated battery wires
- One year limited warranty through Castle Creations beginning at date of purchase
- Motor;
- High-strength 180C grade neodymium sintered magnets with high-strength wrap
- High-temperature, high purity copper windings
- High-performance 0.2mm steel lamination stacked stator
- Vibration dampening wave spring on shaft
- Rotor position sensor eliminates cogging and inconsistency during startup
- CNC machined 6061 T-6 aluminum endbells and motor can
- 13AWG high strand count silicone insulated wires with 4mm male bullet connectors
- Four pole configuration for maximum efficiency at high RPM
- ROAR standard sensor port and labeled connections
- Replaceable front end bell/bearing assembly and rotor/shaft assembly
- Replaceable Wire Harness with Receiver Wire, AUX Wire, Fan Connector, and Waterproof Switch
- Replaceable Motor Sensor Harness
- 12AWG Battery Wires
- Cooling Fan
- 4mm Gold Plated male and Female Bullet Motor Connectors
- 1415 1Y 2400Kv 4-Pole Sensored brushless Motor w/1/8" 3.17mm Shaft
- Sensor Wire
- Three 3x5mm Socket Head Cap Screws
- Input Voltage Range: 2S - 6S LiPo
- BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
- Programmable: Fully programmable with Castle Link USB Adapter, and downloadable Castle Link Windows software
- Telemetry Link Capable: Yes
- Brake: Proportional
- Reverse: Yes, may be disabled for racing
- Cooling Fan: 1.2" (30mm) removable
- 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
- Max Recommended Vehicle Weight: 9lbs (4kg) with batteries, ready to run
- Motor; CSEC6000
- Input Voltage Range: 3-4S LiPo
- Kv: 2400
- Max RPM: 75, 000
- length: 2.7" (69.5mm)
- diameter: 1.4" (36mm)
- Shaft diameter: 1/8" (3.17mm)
- Shaft length: 0.61" (15.5mm)
- Weight: 11.2oz (318g)
- Mounting Hole Size: M3 @ 25mm
Manufacturer information
Your Mamba is warranted for one (1) year from date of purchase to be free from manufacturing and component defects. This warranty does not cover abuse, neglect, or damage due to incorrect wiring, over voltage, or overloading. If you have any questions, comments, or wish to return your Mamba for warranty or non-warranty repair/replacement contact Castle Creations at: Castle Creations 402 E. Pendleton Ave. Wellsville, KS 66092 Tel: (785) 883- 4519 Email: info@castlecreations.com Fax: (785) 883- 4571 Website: http://www.castlecreations.com All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Compatible vehicles
1:10 Baja Rey 4WD Desert Truck
1:10 Night Crawler Scale Edition
Ascender 1:10 Chevrolet K5 Blazer
DESC410R 1:10 Electric 4WD Short Course Truck
SMT10 Grave Digger Monster Jam Truck
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
20.32 ounces
576.06 grams
1.27 pounds
Package dimensions
2.00 x 4.50 x 7.00
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️