Powermax 4200mh LiPo 7.4v (Tamiya Plug) 45c
Description
- Protective ABS case has the same dimensions as a six cell 7.2 stick pack
- Wired for balancing with JST XH (ElectriFly Style) balance plug
- LiPo charger and balancer such as the Onyx 235 AC/DC Charger
- LiPo charging bag
- Number of Cells in Series: 2
- Rated Voltage: 7.4V
- Continuous Discharge Rate: 45C
- Weight: 7.4oz (210g)
- Length (case): 140mm
- Length (w/ wires bent over): 150mm
- width: 45mm
- height: 25mm
- ALWAYS use a LiPo Cell Balancer
- NEVER Charge over 4.2V per cell
- NEVER Charge at currents greater than 1C
- NEVER Charge through the "To ESC or "DISCHARGE" lead
- NEVER Trickle Charge
- NEVER allow to Discharge below 2.5V per cell
- NEVER disassemble or modify pack wiring in any way or puncture cells
- NEVER place on combustible materials or leave unattended during charging
- ALWAYS Charge in a fireproof location
- ALWAYS set charger's output volts to match battery volts
- ALWAYS keep out of reach of children
description revised by: SN January 14, 2021
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
8.80 ounces
249.48 grams
0.55 pounds
Package dimensions
1.75 x 8.00 x 2.25
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️