Red Monster Blower Heat Sink Fan W/ Deans Conn - 1/8 Motors
Description
- Large 40x40x10.3mm 7-blade fan
- Clip-on design for simple installation
- Red anodized aluminum heat sink provides efficient heat transfer
- Adapter with Deans-style connectors
- 24AWG silicone wire
- One (1) Deans-style adapter connector
- Recommended to loosen fan screws during installation, then tighten again after installation. This will help minimize tweaking and binding the fan.
- Medium strength thread lock (blue threadlocking compound) on fan mount screws
- Ensure fan blades are protected
- This system uses a Deans-style connector. If your system uses another type of connector you'll have to switch connectors or use an adapter. See Hot Racing MH404F06 for equivalent system with a TRA-style connector
- Input Voltage: 11.1V (12V max)
- Fits motors with a can diameter of 1.6 inches (40mm)
- Replacement Hot Racing 40x40x10.3mm fan is MH404F
description revised by: SN February 18, 2019
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Compatible vehicles
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Related parts
Additional details
Shipping weight
1.70 ounces
48.19 grams
0.11 pounds
Package dimensions
5.00 x 3.50 x 2.00
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️